
Features:
- Pen-type Gas Leak Detector: Detect the presence of all kinds of combustible gas and react very quickly. Compact and lightweight, easy to carry.
- Sensitivity Selection: High and low sensitivity are switchable for different scenarios.
- Auto Power Off: No operation, no alarm signal, automatic shutdown after about 5 minutes.
- Audible and Visual Alarm: Send out an audible and visual alarm if combustible gas is detected.
- Easy to Read: LCD display with green backlight ensures clear visibility even in the dim light.
Note:
- Turn on the instrument in a clean air environment and wait for the warm-up to complete.
- Always check the function of the gas detector before using it to ensure that it is normal.
- Ensure that the gas concentration does not exceed 20% LFL ( Lower flammability limit ).
HT60 Gas Leak Detector Specifications
| Material | ABS |
| Display | LCD |
| Detection Range | 50~1000ppm (methane) |
| Response Sensitivity | <50ppm (methane) |
| Warm-Up Time | Approx. 30 sec |
| Reactions Time | ≤500PPM: Approx. 5sec; >500PPM: Approx. 2sec |
| Alarm Mode | Visible & Audible |
| Operating Conditions | 0~50°C / 20~80% RH |
| Storage Conditions | -10~60°C / 20~80% RH |
| Powered By | 2 x 1.5V AAA Alkaline |
|
|
|
|
|---|---|---|
Visual & Audible AlarmThis gas detector pen will send out a visual and audible alarm if any combustible gas is detected. As the concentration goes up, the audible alarm beep more frequently and the screen flashes red with a bar graph indicating the approximate strength detected. |
Convenient Pocket Clip DesignLightweight and compact, this gas leak detector pen conveniently clips to your shirt pocket to carry with you. The non-slip texture on both sides of the gas leak detector fits nicely and ergonomically in your hand. |
High & Low Sensitivity AdjustableHigh and low sensitivity are switchable for different scenarios. Low sensitivity detects 500-1000ppm. High detects 50-500ppm. Set high sensitivity to find small gas leaks, set low sensitivity to find larger explosive gas leaks. Press the “S” button to switch sensitivity. |
|
|
|
|
|---|---|---|
Portable Gas Leak DetectorThis gas leak detector can detect a large number of flammable gases, like acetone, acetylene, alcohol,ammonia, benzene, butane,ethanol, oxirane, gasoline,hexane, hydrogen, methane,naphtha, natural gas, paintthinners, propane, solvents and more. Notes: it only detects combustible gases, can not detect CO2. |
Reliable Gas Leak Detector & Easy to UseHigh precision gas sensor for accurate and reliable gas leak detection, fast response time less than 5 seconds. Has an easy-to-understand interface with its on/off buttons and sensitivity switch buttons “S”, customers can operate the device with one hand. Without complicated instructions, extremely simple to use. |
Auto Power Off & Low Battery IndicatorAuto power off after about 5 minutes if there are no operation. LCD display with green backlight ensures clear visibility even in dim light. It has a low-battery indicator. It is great for checking for leaks on gas lines, storage cylinders, valves, connections, gauges, regulators, etc. |

