Air Quality Monitor, Indoor Air Quality Pollution Detector Accurate Tester for HCHO (Formaldehyde) TVOC PM2.5 PM1.0 PM10, with Temperature Humidity Monitoring
MULTIFUNCTIONAL AIR QUALITY MONITORS: AUTENS upgraded air quality detector can be used for monitoring HCHO, TVOC, PM2.5, PM1.0, PM10, temperature and humidity. Suitable for home, office, car and other sealed space, so you can measure the air quality anytime which gives you more sense of security. This air quality monitor is equipped with 2.8 inches HD color screen, light and small you can carry it to anywhere you want.
Just slide the power ON/OFF button, the air quality monitor will automatically detect various indicators in the air, when the air is fresh, the screen will show Smiley and green color, easy to use.
This air quality monitor comes 32 bit ARM high-performance computing chip, electrochemical formaldehyde sensor, laser PM2.5 sensor, temperature sensor, humidity sensor, TVOC sensor and air convection system, ensure the data is accurate and effective.
Real-time data monitoring, and the fluctuation of the data can shows the quality of environment, convenient to use. It can be checked online for 24 hours without supervision.
How to detect the air quality where I want?
Turn on the air quality monitor and leave it in a cool and ventilated place over 1 hour if it is the first time to use or haven’t been used for more than 3 months. Or the result you get may not be accurate.
1. Power on the detector and keep it running for 3 minutes without any operation.
2. Take the detector to an area outdoor where the air is fresh and circulate.
3. Click “C” key to enter the auto-calibration interface.
4. Click “A” key to start auto-calibration.
5. After 5 mins, press the”D” key back to the overall interface to finish the calibration
6. Take the air quality monitor to the place where you want to detect.
7. Put the air monitor in a place where is clean and keep it running for 5 minutes.
8. Then you will get more stable results of formaldehyde and TVOC.
1.Please detect air quality from low density environment to high density environment
2.Please put machine where is cleaning when detecting the data
3.Don’t block the detection port with anything when detecting the date
HCHO range: 0 ~ 1.999mg/m3,resolution: 0.01ppm
TVOC range: 0-9.999 mg/m³,resolution: 0.01ppm
PM1.0/PM2.5/PM10 range: 0-999ug/m³,resolution: 0.1 ug/m³
Temperature range: 0-50?
Humidity range: 20~90% RH
1*Air Quality Tester
1*USB Charging Cable